A standing seam metal roof is a kind of roofing system. It is made from vertical metal panels that stand up vertically. These are crimped together to seal the joint, preventing moisture from leaking into your home. This is 8 of standing seam metal roof benefits.

  1. A standing seam metal roof is very durable and low-maintenance.
  2. It can last for at least fifty years and do not even need maintenance in order to keep their good quality.
  3. Standing seam metal is also very resistant to the elements and has high wind rating.
  4. These are even highly resistant to fire, so these are very good investments to make.
  5. This roof system is also very easy to install. All you have to do is to attach these together using clips from underneath.

    Read the rest of this entry

Properly exhaust the air out of the home and finish your roof cap matched to your system’s needs. This Standing seam metal roof hood is made of galvanized steel with bird screens and spring loaded back draft damper. Standing seam metal roof hood The Finishing Touch to any System is the Wall or Roof Cap. Properly Exhaust the Air Out of the Home Using a Roof or Wall Cap Matched to Your System’s Needs Painted Steel Roof Cap Spring Loaded Damper
I was worried that the bottom of the unit might not have a collar long enough to attach my vent pipe. However the collar that allowed attaching the vent pipe to it from inside the attic. Damper works great. I had to vent this to the front roof line.

Read the rest of this entry

The Snap on cap with clips can be curved to a minimum radius of 5′ for convex curve with additional forming at the factory. Panels can be curved to a minimum radius of 25′ for convex, and 35’ for concave if they are curved in the field. If panels are tapered, they cannot be curved at the factory, thus limiting them to a 25′ and 35’ radius for field curving. The caps must always be curved at the factory regardless of radius.

The minimum panel width for tapered panels is 1″ and the maximum panel width is 20″. The maximum length for such panels is 40′. Snap on cap with clips panels must be installed on a solid substrate. It is strongly recommended that a suitable under placement be placed under the panels. A 1″ seam height is standard on all curved applications.

Read the rest of this entry

The GUARDIAN Standing Seam Metal  Roof Clamp works on flat or sloped roofing capable of supporting 3,000 lbs. This Standing Seam Roof Clamp provides specialized components to keep a worker safe without causing damage to a standing seam rooftop. This clamp is NOT for use in work positioning. The clamp provides fall arrest or restraint attachment for one worker weighing no more than 310 lbs, the worker attaches directly to the anchor point using a retractable lifeline and harness system. Standing Seam Metal  Roof clamp features a swivel design that allows a worker 360 degrees of mobility, it is lightweight, portable and easily installs in minutes. Sold individually.

Read the rest of this entry

A double roof is a roof whose rafters are of such a length that they require an intermediate support. This support is usually a beam which is secured under the rafters at a point half way between the ridge and the wall plate. This beam is known as a purlin. In gable roofs, the purlin is built into the gable wall to provide added support. In double pitched roofs, the purlin is fixed to the rafters in a continuous length, jointed at all the internal and external corners of the roof.

Read the rest of this entry

A lifetime roof that makes sense now and in the long-run, increasing the resale value of your home and often times reducing your insurance rates. A standing seam metal roof will last 2-3 times longer than shingles and it is likely to be the last roof you ever install on your home. Strong and Durable. Fire resistant and proven capability to sustain extreme high wind conditions. Standing seam metal roof contains significant recycled content and at the end of its useful life the material is 100% recyclable. Designed to perform under the stresses of Maine’s extreme climate in combating snow, ice and weight problems. Fasteners are hidden beneath the standing seam metal roof surface.

Read the rest of this entry

The Standing seam metal roof are present a material commonly used for roofing, ceiling, wall panels, steel side, fences and more. This covers all construction work in the factories and housing. The new alternative. Replace other roofing materials, such as a sheet of zinc, polycarbonate sheet, and traditional tiles.


It can also be used both for spanning steel, wood flour and mix with a wooden and concrete structure. Residential buildings, commercial buildings, industrial shed, garage storage, garage roof. The roof of the bus stop. Workshop windows home condo apartment very well.

Read the rest of this entry

The Malco TurboShear convert your power drill to a power shears. To operate this time-saving tool, simply insert the TurboShear directly into any 3/8-inch chuck of a standard 1,200 RPM A/C or cordless drill. This rugged but inexpressive accessory cuts straight and to the left. It makes fast cuts in sheet metal and is capable of navigating tight curved patterns and squares in heavy 20-gauge galvanized steel. Blind cuts require only a 1/2-inch starting hole. Cutting applications include both ferrous and non-ferrous sheet metals, metal roofing/building panels, vinyl, steel mesh, duct work, even the thick metal of furnace jackets, equipment enclosures or automotive body panels. An offset design keeps both hands away from work surface. The long-wearing hardened jaws are also replaceable.

 

Product Features

  •     Converts your power drill to a power shears
  •     Makes fast cuts in sheet metal
  •     20-gauge capacity in galvanized steel
  •     Makes short work of long rip cuts in metal roofing or building panels
  •     Inserts into any 3/8-inch chuck drill

Trapezoidal standing seam metal roof system is steel building roof  option. This virtually maintenance free metal roof system is the most successful trapezoidal standing seam roof system.  The Trapezoidal Standing Seam Roof system option for steel buildings possesses superior flexibility enabling it to be installed as a non seamed roof, or a seamed roof, with the ability to reinforce the seam without additional exterior clips, offering customers unheard of value. This Trapezoidal standing seam metal roof system is well designed, economical, easy to manufacture, ship and erect. It meets stringent load requirements and possesses all essential roof features, including outstanding flexibility, low capital investment, strength and water tightness.

Read the rest of this entry

This video explains how to Measure And Install Multi Rib Metal Roofing. The video shows you the basics on what you need to know about how to do a metal roof. I hope this video has been helpful to at least a few of you.